FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   PreferencesPreferences   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Forum index » Science and Technology » Physics » Acoustics
Making It Loud?
Post new topic   Reply to topic Page 15 of 16 [228 Posts] View previous topic :: View next topic
Goto page:  Previous  1, 2, 3, ..., 13, 14, 15, 16 Next
Author Message
Gary Sokolich
science forum beginner


Joined: 15 Sep 2005
Posts: 15

PostPosted: Thu Feb 09, 2006 2:29 am    Post subject: Re: Fighting AIDS -- knowing heals knowing kills - Reply to Gary Sokolich Reply with quote

INSANE Bob Cain <arcane@arcanemethods.com> wrote in
news:dsbqmq09qg@enews1.newsguy.com:

Quote:
Gary Sokolich wrote:
Bob Cain <arcane@arcanemethods.com> wrote in

As all who have been around a bit have witnessed, he is hopelessly
insane.

Bob

Thank you for that diagnosis, Dr.Bob. It is certainly worth every
penny that I paid you for it.

It doesn't take a weatherman to know which way the wind blows.


And it doesn't take a genius to see the sadistic, evil soul that is behind
your crumbling facade.



Quote:
BTW, it is obvious that you got your degree in
psychiatry from the same mail order house that sold you your fake
degree in engineering.

Gary clearly demonstrates his loss of touch with reality.



And Bob Cain repeatedly demonstrates that he is a jack(ass) of all trades
and master of none, as well as a pathological liar, congenital hypocrite
and narcissistic sociopath.



Quote:
Or is it just his propensity to lie?


Or is just my propensity to tell the truth?


Quote:
Ah, well. A wingnut is a wingnut however it's turned.
Bob


And Bob Cain is a liar, fraud, hypocrite, narcissist and sociopath,
irrective of the facade behind which he hides and the spin that he utilizes
to deceive his mindless flock of admirers.
Back to top
matthewbanik@gmail.com
science forum beginner


Joined: 09 Feb 2006
Posts: 1

PostPosted: Thu Feb 09, 2006 12:53 pm    Post subject: Re: Fighting AIDS -- knowing heals knowing kills - Reply to Gary Sokolich Reply with quote

Bob Cain wrote:
Quote:

"Things should be described as simply as possible, but no simpler."

A. Einstein


hmmmm .... that Einstein quote has as much depth as piss on a flat
rock.

-Matt
Back to top
Gary Sokolich
science forum beginner


Joined: 15 Sep 2005
Posts: 15

PostPosted: Fri Feb 10, 2006 1:58 am    Post subject: Re: Fighting AIDS -- knowing heals knowing kills - Reply to Gary Sokolich Reply with quote

Insane Bob Cain <arcane@arcanemethods.com>, the pathological liar and
hypocrite, narcissist and sadistic sociopath wrote in
news:dsc9tg0vbl@enews4.newsguy.com:


Quote:
Chris Hornbeck wrote:
On Tue, 07 Feb 2006 20:05:47 -0800, Bob Cain
arcane@arcanemethods.com> wrote:

It doesn't take a weatherman to know which way the wind blows.

At some point, you're going to have to cut this poor
fucker loose.

I hear ya and I'd love to but there are reasons I can't go into why I
need to continue tagging his anonymous stalking with his name.


Anonymous? Who's kidding who? If you believe that drivel, you've
obviously been twisting tongues with morons like Chris Hornbeck way too
long. There is no law which prohibits posting to newsgroups using a nic,
or multiple nics. And, using a nic or multiple nics, does not necessarily
imply anonymity. Thanks to your cooperative participation, my posts are
about as anonymous as yours. By tagging and calling attention to my posts
your are essentially shooting yourself in the foot when it comes to your
absurd claim of "anonymous stalking." Furthermore, whether you like it or
not, the fact of the matter is that I don't relinquish my rights of free
speech, when I log onto the internet, irrespective of whether I post under
my own name or under a nic, and I don't need your permission to express my
opinions in public internet newsgroups. If you don't like what I have to
say, that's just too f___ing bad.


Quote:
I gotta learn to leave it there but I get concerned that someone naive
might believe his unprovoked slander unless I call a spade a spade now
and then.
Bob

Your real concern/fear is that others might take a good look and realize
that everything that I say about you is indeed true.
Back to top
Hero
science forum Guru Wannabe


Joined: 29 Apr 2005
Posts: 220

PostPosted: Sun Mar 05, 2006 2:48 pm    Post subject: Re: from Bekesy to cochlear implants Reply with quote

Jan Panteltje schrieb:

Quote:
On a sunny day (5 Mar 2006 01:19:37 -0800) it happened "maestro"
StpNrrs@aol.com> wrote in
1141550377.841722.213380@j33g2000cwa.googlegroups.com>:

I find the system you propose very interesting, but will have to read this
some times to make sure I grasp exactly what you mean.
I have my own idea, and have been attacked for that (here).
I come from an electronics background, and have quite a bit audio experience
(recording studio).
From an electronic perspective, the little (wound tube) with fluid sort of
is a serial to parallel converter.
The sound comes in, is lead to the membrane at the start of that tube.
Because of the fluid in the tube, the pressure variations now move much
faster (then in air).
(Think if we originally came from the sea as species, we took the water with
us).
.............
The tube is conical, and reflections may or may not occur at its end,
leading to a standing wave pattern, in which case indeed some points
along the tube would be active for some frequencies more then others, but I
say: serial to parallel converter (shift register in electronics).
Here are my 2 cents to this.

A flood wave running into the mouth of a river is steeping up, so the
sine-wave-form of the tides change to a sawtooth-like form. Something
similar happens in waves, which are not surface-waves, when they move
into a narrowing opening
Quote:
The tube is conical....
Have success

Hero
Back to top
Repeating Rifle
science forum Guru Wannabe


Joined: 25 Mar 2005
Posts: 205

PostPosted: Sun Mar 05, 2006 5:15 pm    Post subject: Re: newbie Q: sound absroption Reply with quote

On 3/5/06 5:02 AM, in article
ejBOf.226$sL2.112@newsread2.news.atl.earthlink.net, "Noral Stewart"
<noral.stewart@ixdotnetcomdotcom> wrote:

Quote:
Have you thought about what the main ingredient in fiberglass is? I think
they have shown that mice forced to eat very large quantities of fiberglass
develop cancer also. Question is whether the material can actually get into
your system in sufficient quantity to do any damage. Fiberglass fibers are
very large compared asbestos fibers, and thus do have have the same danger
of inhalation into the lungs.

Also, glass (sodium and calcium silicates) is more soluble in body fluids
than silica.

Bill

-- Ferme le Bush
Back to top
Repeating Rifle
science forum Guru Wannabe


Joined: 25 Mar 2005
Posts: 205

PostPosted: Sun Mar 05, 2006 5:15 pm    Post subject: Re: newbie Q: sound absroption Reply with quote

On 3/5/06 5:02 AM, in article
ejBOf.226$sL2.112@newsread2.news.atl.earthlink.net, "Noral Stewart"
<noral.stewart@ixdotnetcomdotcom> wrote:

Quote:
Have you thought about what the main ingredient in fiberglass is? I think
they have shown that mice forced to eat very large quantities of fiberglass
develop cancer also. Question is whether the material can actually get into
your system in sufficient quantity to do any damage. Fiberglass fibers are
very large compared asbestos fibers, and thus do have have the same danger
of inhalation into the lungs.

Also, glass (sodium and calcium silicates) is more soluble in body fluids
than silica.

Bill

-- Ferme le Bush
Back to top
Sokolich
science forum beginner


Joined: 11 Feb 2006
Posts: 30

PostPosted: Thu Mar 16, 2006 2:13 am    Post subject: Re: Einstein Procrusteanizes Time Dilation - Response to Bob Cain Reply with quote

Bob Cain <arcane@arcanemethods.com> wrote in
news:dtp749028kq@enews1.newsguy.com:

Quote:
Oops, sent that last response before it was finished instead of saving
it. It's pretty late here so I'll do that tomorrow and close the loop
on why it's important.
Bob

Tomorrow has come and gone. Obviously, you either lack the ability to
defend your preposterous assertions or you lack the knowledge to discuss
the issue in an intelligent and technically-competent manner.
Back to top
GregS
science forum beginner


Joined: 30 Jun 2005
Posts: 47

PostPosted: Mon Mar 27, 2006 2:04 pm    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

In article <e08qqd$pei$2@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu (GregS) wrote:
Quote:
In article <e08poc$pei$1@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu (GregS)
wrote:
In article <1143413480.924066.270670@i40g2000cwc.googlegroups.com>, "edward"
edward@dellaenterprises.com> wrote:
Hello,

I am testing a sound protection and recording system that will
withstand very loud sounds. I need to test in a sound field that is at
least 135dB or better. I'm performing real world testing at 135 to
153dB SPL and need to simulate those levels in a room in my office
building. Can someone suggests a combination of components (speakers,
amplifiers, etc) and manufacturers that can get me close to these
ranges. The sounds that I am wishing to replicate are from jet aircraft

You might be able to get the levels and relative bandwidth using
a horn driven by an air gun of some sort. I'm crossposting this
message.

greg
Back to top
avare
science forum beginner


Joined: 27 Mar 2006
Posts: 4

PostPosted: Mon Mar 27, 2006 3:19 pm    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

Within the specifics of your post, EAW, Meyer, JBL, Electro-Voice,
L'Acoustics all make speakers that will met your criteria.

Good luck!
Andre
Back to top
bert stoltenborg
science forum addict


Joined: 16 May 2005
Posts: 52

PostPosted: Mon Mar 27, 2006 11:41 pm    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

Doesn't have a jet aircraft loads of Low freq?

Neky Lyk wrote:
Quote:
"GregS" <szekeres@pitt.edu> wrote in message
news:e08rcr$pei$4@usenet01.srv.cis.pitt.edu...

In article <e08qqd$pei$2@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS) wrote:
In article <e08poc$pei$1@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS)
wrote:
In article <1143413480.924066.270670@i40g2000cwc.googlegroups.com>,
"edward"
edward@dellaenterprises.com> wrote:
Hello,

I am testing a sound protection and recording system that will
withstand very loud sounds. I need to test in a sound field that is at
least 135dB or better. I'm performing real world testing at 135 to
153dB SPL and need to simulate those levels in a room in my office
building. Can someone suggests a combination of components (speakers,
amplifiers, etc) and manufacturers that can get me close to these
ranges. The sounds that I am wishing to replicate are from jet aircraft

You might be able to get the levels and relative bandwidth using
a horn driven by an air gun of some sort. I'm crossposting this
message.

greg


i agree, try to find something with a horn and a compression chamber. no
idea about the amp.
Back to top
Greg Locock
science forum Guru Wannabe


Joined: 28 May 2005
Posts: 111

PostPosted: Tue Mar 28, 2006 6:09 am    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

szekeres@pitt.edu (GregS) wrote in
news:e08rcr$pei$4@usenet01.srv.cis.pitt.edu:

Quote:

In article <e08qqd$pei$2@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS) wrote:
In article <e08poc$pei$1@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS)
wrote:
In article <1143413480.924066.270670@i40g2000cwc.googlegroups.com>,
"edward"
edward@dellaenterprises.com> wrote:
Hello,

I am testing a sound protection and recording system that will
withstand very loud sounds. I need to test in a sound field that is
at least 135dB or better. I'm performing real world testing at 135
to 153dB SPL and need to simulate those levels in a room in my
office building. Can someone suggests a combination of components
(speakers, amplifiers, etc) and manufacturers that can get me close
to these ranges. The sounds that I am wishing to replicate are from
jet aircraft

You might be able to get the levels and relative bandwidth using
a horn driven by an air gun of some sort. I'm crossposting this
message.


I've seen and used a compressed air chamber modulated by a slide valve to
create high SPLs. It was not high fidelity by any means, but was OK for
signal analysis.
Back to top
GregS
science forum beginner


Joined: 30 Jun 2005
Posts: 47

PostPosted: Tue Mar 28, 2006 1:44 pm    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

In article <1143502912.762645.5130@u72g2000cwu.googlegroups.com>, "bert stoltenborg" <bert@chaingang.nl> wrote:
Quote:
Doesn't have a jet aircraft loads of Low freq?

I think so, but the higher freqs dominate. I think it reminds me of a acetelyne
torch, but a whole bunch louder. In another group, a driver by
Community was given which could deliver the 137 dB and more,
but limited from 100 to 4 kHz.

greg

Quote:
Neky Lyk wrote:
"GregS" <szekeres@pitt.edu> wrote in message
news:e08rcr$pei$4@usenet01.srv.cis.pitt.edu...

In article <e08qqd$pei$2@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS) wrote:
In article <e08poc$pei$1@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS)
wrote:
In article <1143413480.924066.270670@i40g2000cwc.googlegroups.com>,
"edward"
edward@dellaenterprises.com> wrote:
Hello,

I am testing a sound protection and recording system that will
withstand very loud sounds. I need to test in a sound field that is at
least 135dB or better. I'm performing real world testing at 135 to
153dB SPL and need to simulate those levels in a room in my office
building. Can someone suggests a combination of components (speakers,
amplifiers, etc) and manufacturers that can get me close to these
ranges. The sounds that I am wishing to replicate are from jet aircraft

You might be able to get the levels and relative bandwidth using
a horn driven by an air gun of some sort. I'm crossposting this
message.

greg


i agree, try to find something with a horn and a compression chamber. no
idea about the amp.
Back to top
GregS
science forum beginner


Joined: 30 Jun 2005
Posts: 47

PostPosted: Tue Mar 28, 2006 1:55 pm    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

In article <e0bek7$ecf$1@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu (GregS) wrote:
Quote:
In article <1143502912.762645.5130@u72g2000cwu.googlegroups.com>, "bert
stoltenborg" <bert@chaingang.nl> wrote:
Doesn't have a jet aircraft loads of Low freq?

I think so, but the higher freqs dominate. I think it reminds me of a acetelyne
torch, but a whole bunch louder. In another group, a driver by
Community was given which could deliver the 137 dB and more,
but limited from 100 to 4 kHz.

I can appreciate the noise involved. I have been to the drag strip,
and sat both to the side and very close to the rear of one of
those jet things. I put it on my camcorder, and played it back on the stereo
with much of the same impact. Even though my camcorder does
a pretty good job on audio, there is some clipping involved. I don't
know the exact SPL these people are receiving at the track and at
indoor events. Some of the funny cars are pretty loud also.

greg
Back to top
TheGhost
science forum addict


Joined: 09 Aug 2005
Posts: 85

PostPosted: Tue Mar 28, 2006 2:24 pm    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

Greg Locock <greglocock@yahoo.com.au> wrote in
news:Xns9794A4606A7BB77777777777777777777@211.29.133.50:

Quote:
szekeres@pitt.edu (GregS) wrote in
news:e08rcr$pei$4@usenet01.srv.cis.pitt.edu:


In article <e08qqd$pei$2@usenet01.srv.cis.pitt.edu>,
szekeres@pitt.edu (GregS) wrote:
In article <e08poc$pei$1@usenet01.srv.cis.pitt.edu>,
szekeres@pitt.edu (GregS)
wrote:
In article <1143413480.924066.270670@i40g2000cwc.googlegroups.com>,
"edward"
edward@dellaenterprises.com> wrote:
Hello,

I am testing a sound protection and recording system that will
withstand very loud sounds. I need to test in a sound field that is
at least 135dB or better. I'm performing real world testing at 135
to 153dB SPL and need to simulate those levels in a room in my
office building. Can someone suggests a combination of components
(speakers, amplifiers, etc) and manufacturers that can get me
close to these ranges. The sounds that I am wishing to replicate
are from jet aircraft

You might be able to get the levels and relative bandwidth using
a horn driven by an air gun of some sort. I'm crossposting this
message.


I've seen and used a compressed air chamber modulated by a slide valve
to create high SPLs. It was not high fidelity by any means, but was OK
for signal analysis.



http://www.wylelabs.com/sp1b.html
Back to top
Geoff Leventhall
science forum beginner


Joined: 31 Mar 2006
Posts: 1

PostPosted: Fri Mar 31, 2006 8:07 pm    Post subject: Re: Need suggestions for equipment for generating greater than 135dB SPL Reply with quote

If you look at www.iasca.com and click on News, you'll find that somebody
reached 180.3dB with his car audio - but probably not for long

Geoff



"GregS" <szekeres@pitt.edu> wrote in message
news:e08rcr$pei$4@usenet01.srv.cis.pitt.edu...
Quote:

In article <e08qqd$pei$2@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS) wrote:
In article <e08poc$pei$1@usenet01.srv.cis.pitt.edu>, szekeres@pitt.edu
(GregS)
wrote:
In article <1143413480.924066.270670@i40g2000cwc.googlegroups.com>,
"edward"
edward@dellaenterprises.com> wrote:
Hello,

I am testing a sound protection and recording system that will
withstand very loud sounds. I need to test in a sound field that is at
least 135dB or better. I'm performing real world testing at 135 to
153dB SPL and need to simulate those levels in a room in my office
building. Can someone suggests a combination of components (speakers,
amplifiers, etc) and manufacturers that can get me close to these
ranges. The sounds that I am wishing to replicate are from jet aircraft

You might be able to get the levels and relative bandwidth using
a horn driven by an air gun of some sort. I'm crossposting this
message.

greg
Back to top
Google

Back to top
Display posts from previous:   
Post new topic   Reply to topic Page 15 of 16 [228 Posts] Goto page:  Previous  1, 2, 3, ..., 13, 14, 15, 16 Next
View previous topic :: View next topic
The time now is Thu Sep 21, 2017 11:16 pm | All times are GMT
Forum index » Science and Technology » Physics » Acoustics
Jump to:  

Similar Topics
Topic Author Forum Replies Last Post
No new posts Fuzzy Inference System (FIS) Based Decision-Making Algori... amizo1@gmail.com Mechanics 0 Fri Jul 14, 2006 7:26 pm
No new posts Prion disease is caused by a virus or bacteria making the... a_plutonium@hotmail.com Chem 1 Fri Jun 23, 2006 6:45 pm
No new posts "The Making of Observations in Relativistic Systems" Bew Particle 0 Sun Jun 11, 2006 2:27 pm
No new posts "The Making of Observations in Relativistic Systems" Bew Particle 0 Sun Jun 11, 2006 2:26 pm
No new posts "The Making of Observations in Relativistic Systems" Bew Physics 0 Sun Jun 11, 2006 2:26 pm

Copyright © 2004-2005 DeniX Solutions SRL
Other DeniX Solutions sites: Electronics forum |  Medicine forum |  Unix/Linux blog |  Unix/Linux documentation |  Unix/Linux forums  |  send newsletters
 


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0369s ][ Queries: 16 (0.0052s) ][ GZIP on - Debug on ]