science forum beginner
Joined: 10 Mar 2006
|Posted: Mon Jul 10, 2006 2:52 am Post subject:
FE-Sizer Release 3.30 Latest Version
FE-Sizer now performs flashing and cavitation checks on liquid flows!
Do you perform, maintain, or review/check orifice calculations for your
production plant's orifice flow meters or for process plant instrumentation
design engineering for your engineering firm? Then you must try the latest
release of FE-Sizer - Orifice Flow Meter Sizing Software...the orifice meter
sizing software of choice for many flow meter fabricators.
Download the latest demonstration version of FE-Sizer for Windows, Version
3.0, Release 3.30, orifice meter sizing software from the following website:
FE-Sizer is the best in differential pressure type flow meter sizing
software. It quickly and accurately sizes flow meters using the latest
standards and discharge coefficient correlations. The user interface is
flexible, easy-to-use, and complete with pull-down menus and pop-up pick
If you have yet to discover FE-Sizer and have a need for orifice meter
sizing software, do yourself a favor. Find out how easy it can be to size
and document your plant operations orifice meters. Create a database of
orifice meters and recall them for update at anytime.
You owe it to yourself to have the best software on the market for sizing
and selecting orifice meters. Software Technical Specifications follow...
FE-Sizer for Windows, Version 3.0 - Release 3.30
Flow Meter Sizing Software for Control and Instrumentation Professionals.
FE-Sizer is a valuable engineering tool for sizing and selecting head-type
flow meters in closed conduits. It is flexible, easy-to-use, and complete
with appropriate menus and lists. The software includes meter selection,
material tables and pipe data tables.
A table of standard drain and vent hole diameters are available where the
user selects the hole diameter to calculate the drain/vent hole correction
factor, FDH. These factors aid the user in selecting the proper meter
application. Extensive built-in warnings flag potential application and
data entry errors.
The program equations, methods and procedures comply with the following
standards governing the sizing and specification of head-type orifice meter
ASME MFC-3M (Both 1989 and 2004 Editions) * Measurements of Fluid
Flow in Pipes Using Orifice, Nozzle and Venturi
ANSI/API 2530-AGA Report No. 3 (Both 1985 and 1992 Editions) * Orifice
Metering of Natural Gas and Other Related Hydrocarbon Fluids - Part 3
Natural Gas Applications
ISO-5167 (1991) * Measurement of fluid flow by means of pressure
differential devices inserted in circular cross-section conduits running
Part 1: Orifice Plates, Nozzles and Venturi Tubes
ISO-5167 (2003) * Measurement of fluid flow by means of pressure
differential devices inserted in circular cross-section conduits running
Part 1 - General principles and requirements
Part 2 - Orifice Plates
Part 3 - Nozzles and Venturi nozzles
Part 4 - Venturi tubes
Sizing methods use the iterative procedure described in R. W. Miller's,
Flow Measurement Engineering Handbook, Third Edition, McGraw-Hill
Publishing Company. The discharge coefficient correlations for concentric
bore orifice plates include the following standards:
Miller/Stolz equations - ASME MFC-3M (1989) and ISO-5167 (1991)
Reader- Harris/Gallagher (1998) - ISO 5167 (2003)
Reader- Harris/Gallagher - AGA Report No. 3 (1992)
Buckingham - AGA Report No. 3 (1985)
For all other meter types the discharge coefficient
correlations are from the ASME standard and R. W. Miller's handbook.
FE-Sizer allows the user to select from the following orifice meter types:
Orifice Plates: Concentric, segmental, eccentric, integral, honed
small-bore pipe, quadrant, and conic style orifice plates.
Flow Nozzles: ASME long radius, ASME throat tap, ISA nozzle, and
Venturi nozzle with ISA inlet.
Venturi tubes: Machined inlet, rough cast inlet, and rough sheet metal
fabricated construction with either 7-degree or 15-degree outlet cones.
Universal Venturi Tubes.
Wedge Meters - both generic types and ABB proprietary.
In addition, the user may enter custom calibrated discharge coefficients
for calculating bores, flows, and differential pressures of custom or
calibrated meter run applications.
FE-Sizer calculates the required orifice bore, flow, or differential
pressure for the following fluid types:
Ideal and non-ideal gases - volumetric flow.
Vapors - mass flow.
Viscous and non-viscous liquids - volumetric flow.
Viscous and non-viscous liquids - mass flow.
Gas and vapor sizing equations may be either Pressure-Volume-Temperature
(PVT) or Density form. Liquid flow sizing equations may be Specific Gravity
or Density form. FE-Sizer includes "critical-drop" flow and bore formulas
for sizing restrictive flow devices for gas, vapor and liquid fluids.
FE-Sizer includes special sizing factors important for flow meter
corrections. Factors included in FE-Sizer are:
Drain and vent hole correction.
Water vapor correction.
Two phase flows - saturated liquid
(0.0%-10.0% vapor mass to total mass content).
Two phase flows - saturated vapor
(90.00% - 100% vapor mass to total mass content).
These factors correct the calculated bore, flow or differential pressure for
FE-Sizer includes a completely selectable units system through pulldown
selection lists that allows the user to change units "on the fly" for any
calculated or input variable.
FE-Sizer allows user to print calculation sheets, data sheets, calibration
charts, or meter system uncertainty calculations from an easy-to-use menu
system. FE-Sizer saves data records in a retrievable electronic format so
future updates to the orifice sizing calculations and data sheets can be
made simply and easily. Data records are retrieved using a built-in
tag/data listing of the stored information.
Project database and management utilities for segregation of
calculations by projects.
Batch print of calculations and data sheets for projects.
ASCII delimited project file import and export to interface FE-Sizer
with existing project databases.
Batch calculation mode for automatic sizing of flow elements from fluid
data imported from an external database.
ASME steam and water property data correlations using the equations
defined by 1967 IPC Formulation for Industrial Use.
Built-in fluid properties database which includes fluid property
correlations for liquid and gases for approximately 100 fluids.
Flow meter index printout from within a project database.
Version 3.0 Enhancements
The FE-Sizer Flow Meter Sizing software package has many new features that
improve the performance of FE-Sizer. Some of the features include:
True 32-bit Windows operating system application.
Support for long filenames.
Selectable fonts and margins for hardcopy output.
User definable margins for metric paper support.
Easier and more flexible units system allows user to set units for
individual calculations instead of an entire project file.
Ability to import ASCII delimited project files from former Version 2.0
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
The time now is Sun Jul 22, 2018 6:10 pm | All times are GMT
Copyright © 2004-2005 DeniX Solutions SRL
Other DeniX Solutions sites:
Electronics forum |
Medicine forum |
Unix/Linux blog |
Unix/Linux documentation |
Unix/Linux forums |
Powered by phpBB © 2001, 2005 phpBB Group